logo MediaMaking
logo MediaMaking
Ronin 2
Ronin 2
The Ronin 2 is a powerful, versatile and intelligent film and video stabilizer. A three-axis stabilized gimbal system allows professionals to make videos more fluid and stable in any situation.
Specifications
Dimensions (WxHxD) 630 x 416 x 720 mm
Weight 6,4 kg
Supported camera dimensions Maximum depth at center of mass on camera base plate: 245 mm

Maximum height measured from top of camera base plate: 165 mm

Maximum width: 180 mm

Load capacity 13,6 kg
Operating temperature -20°C ~ 50°C
Built-in functions Operation Modes
-Underslung Mode
-Upright Mode
-Briefcase Mode
-Handheld, Car Mount, Aerial & Tripod Mode
Axis Modes
-3-axis
-Pan-Lock
-Roll-360 (enabled through firmware update)
Built-in, independent IMU module
DJI Advanced 32-Bit ARM Processor
DJI Specialized Gimbal Drive Motors with Encoders
Dual Battery System
Bluetooth Module
D-Bus Receiver Supported
2.4 GHz/5.8 GHz Receiver
Temperature Sensors
Built-in Touch Panel
Built-in GPS
USB Type-C Connection
Power and Video Signal through Slip Ring

Request information or quotation:

* requested

rent and collect

GoPro HERO9 Black

The GoPro HERO9 Black delivers stunning 5K video and 20MP photos, with HyperSmooth 3.0 stabilization and a waterproof design.

GoPro HERO7 Black

GoPro HERO7 Black The GoPro HERO7 Black camera is designed to capture amazing movies. HERO7 Black's HyperSmooth stabilization allows for smooth shooting as if you were using a gimbal, but without the weight of a gimbal. Camera updates include direct streaming on...

Flycam carbon fiber

Flycam carbon fiber Flycam carbon fiber for video. Compact and lightweight, has a two-way adjustable plate and provided with holes 1/4 ". Specifications Weight 2 kg Capacity load Up to 4 kg Minimum height 56 cm Maximum height 150 cm

Gas Pedestal E-Image 30kg

E-image’s pedestals are ideal solution for both outside broadcasting and studio shooting. Air pump system makes the pedestals move up and down smoothly.

Insta 360 Pro

Insta360 Pro captures 360-degree video and 360-degree spheres, in addition to 8k and 3D, it’s possible to stream while recording using less bandwidth thanks to H.265 compression. It incorporates 6 cameras with 200 ° lens and offers the ability to set shutter speed, as well as having complete control.

Crane 2

Crane 2 is a SLR and mirrorless stabilizer with 3.2kg camera support, OLED screen and electronic follow focus.

Steadicam HANDYMAN G-FORCE

Steadicam HANDYMAN G-FORCE ABC Support bodice with double spring arm complete with stabilizer mount for Camcorder and professional Monitor. Specifications 5,5 kg capacity load Two vest-sizes available (s/m or l/xl) Brand-new vest with angle adjustment for spring arm...

Ready Rig GS Steadicam

The Ready Rig GS is a corset support that allows the operator to stop worrying about the dead weight he has to face in order to concentrate on what matters: the recovery.

Sirui 50mm f/1.8 Anamorphic 1.33x lens

The Sirui 35mm f/1.8 Anamorphic 1.33x lens produces an image circle large enough to cover APS-C sensors. Since the field of view is anamorphous, it is wider than any normal 50mm lens.

RODE NT1-A Microphone

The RODE NT1-A microphone, with an equivalent noise level of only 5dBA is universally recognized (along with the NT1) as one of the world’s quietest studio microphones.

MediaPro Camera Stabilization System

MediaPro Camera Stabilization System MediaPro Camera Stabilization System is a camera stabilizer really robust and technically advanced that provides a stable shooting platform. Specification Weight 2.86 kg Minimum height 64 cm Maximum height 108 cm Weight capacity 5...

Easyrig Steadicam Camera

Easyrig System is specially designed for professional photographers working with handheld equipment. Easyrig can be used with both video and film cameras of medium weight. (8-18 kg)
Easyrig gives you the advantages of both a handheld camera and tripod mounted camera; i.e. with the speed and mobility of the handheld camera you can still achieve steady pictures.

Laowa 12mm Zero D E-mount lens

The LAOWA 12mm f/2.8 ZERO-D adopts a floating optical design that ensures exceptional sharpness both at infinity.

Atomos Shinobi SDI

The flexible Shinobi SDI is on-camera monitor with both 3G-SDI and HDMI inputs, supporting up to DCI 2K via SDI or up to DCI 4K via its HDMI input.

SONY alpha a7 III

The SONY alpha 9 mark II goes beyond the limits of traditional SLRs based on mechanical systems. The first model to employ a high-speed layered design, it is equipped with a 24.2 megapixel full-frame image sensor that temporarily stores large volumes of data in the internal memory, reaching a reading speed of about 20 times faster.

Blackmagic pocket cinema camera 4K

Blackmagic pocket cinema camera 4K Blackmagic's Black Cinema Pocket Cinema 4K camcorder features a 4/3 "sensor for capturing up to 4096 x 2160 DCI 4K speeds of up to 60 fps at a time of codecs, including CinemaDNG Raw / Raw 3: 1 / Raw...

Ronin

The Ronin is a camera stabilization system designed to give the operator close to the freedom of unencumbered handheld shooting but without the hand-shake.

SONY alpha 9 mark II

The SONY alpha 9 mark II goes beyond the limits of traditional SLRs based on mechanical systems. The first model to employ a high-speed layered design, it is equipped with a 24.2 megapixel full-frame image sensor that temporarily stores large volumes of data in the internal memory, reaching a reading speed of about 20 times faster.

ARRI Skypanel S120-C

The ARRI Skypanel S120 is twice as long as S60, while still maintaining about the same weight. Its wider opening makes the quality of diffused light even better.

Dolly CD6

Dolly CD6 equipped with basic platform, suitable for crane 120.

sony venice

SONY Venice CineAlta 6K

Sony VENICE has a 36 x 24 mm full frame image sensor, capable of acquiring images with a maximum resolution of up to 6048 x 4032.

SONY PXW-FS7 Mark II

The new Sony PXW-FS7 II, thanks to the many enhancements, from the brand new optic attachment to the ultra-high-end automatic variable electronic ND system, with greater ergonomics, extends considerably the possibilities of use.

ARRI Skypanel S30-C

The SkyPanel S30 is the smaller and more portable version; with half the length of the SkyPanel S60, it is perfect for use in external locations (ENG crew). Both models are available in versions with color / temperature and remote phosphor adjustment.

Suction cup with a 5/8” receiver for lights, video equipment

This suction cup weighs only 500 g and has a maximum capacity of 32,0 kg. It is for attaching lights or video equipment to smooth surfaces.

MediaPro Car Suction Campod Mount

MediaPro Car Suction Campod Mount allows shock absorbing properties absorbed by the car camera mount.

Sistema di supporto gimbal portatile Tilta Float

Tilta Float Handheld Gimbal Support System

Tilta Float Handheld Gimbal Support System works in conjunction with the DJI RS 2 and RS3 Pro to stabilize the camera.

dji rs3 STABILIZZATORRE PRO combo

DJI RS3 Pro Combo

The DJI RS 3 Pro Combo camera stabilizer with folding handle is an advanced and comprehensive camera expansion platform that empowers videographers and provides coordinated shooting solutions for professional teams.

Blackmagic URSA Mini Pro 4.6K G2

URSA Mini Pro 4.6K G2 is the new generation digital camera with completely revised electronic components and a high performance 4.6K HDR sensor for recordings up to 300 fps.

Car mount suction cup with a payload up to 30 kg

The car mount EI-A40 with suction cups offers camera operators a flexible and secure way to mount your camera to any flat and non-porous surface.

Blackmagic URSA Mini PRO 4.6K EF

Blackmagic URSA Mini PRO 4.6K EF possesses a 4.6K Super 35 sensor with 15 dynamic range stop, perfect for feature films and versatile to allow it to be used in Video mode